Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 89

Chapter 3 Installing the IDS-4215
Note
Step 8 Remove the lower slot cover from the back cover plate.
Attach the back cover plate making sure that the connecting flange on the 4FE
Step 9
card goes through the slot on the back cover plate.
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
When you insert a 4FE card in the slot, the end of the card's connector
extends past the end of the slot. This does not affect the use or operation
of the card.
Removing and Installing the 4FE Card
3-29