Reference Handling; Local/Remote Reference - Danfoss iC2 Application Manual

Application Guide | iC2-Micro Frequency Converters
Table 20: Default Settings (continued)
Category
Jog
Reference limits

Reference Handling

5.6

Local/Remote Reference

5.6.1
Local reference
The local reference is active when the drive is operated and adjusted by Up and Down buttons of the control panel.
Remote reference
The reference handling system for calculating the remote reference is shown in the
66
| Danfoss A/S © 2024.03
Parameter index Parameter name
5.9.2 Jog Reference
5.9.1 Jog Ramp Time
5.5.3.3 Reference Maximum
5.5.3.4 Reference Minimum
Default setting
5.0 Hz
3s
Value is automatically
calculated according
to motor data.
0
Figure 43.
AB413939445838en-000301 / 130R1254
Parameter number
311
380
303
302