Danfoss iC2 Application Manual page 213

Application Guide | iC2-Micro Frequency Converters
Selection number Selection name
17 Mains out of range
18 Reversing
19 Warning
20 Alarm (trip)
21 Alarm (trip lock)
22 Comparator 0
23 Comparator 1
24 Comparator 2
25 Comparator 3
26 Logic rule 0
27 Logic rule 1
28 Logic rule 2
29 Logic rule 3
30 SL Time-out 0
31 SL Time-out 1
32 SL Time-out 2
33 Digital input T13
34 Digital input T14
35 Digital input T15
36 Digital input T17
39 Start command
40 Drive stopped
42 Auto Reset Trip
50 Comparator 4
51 Comparator 5
60 Logic rule 4
61 Logic rule 5
70 SL Time-out 3
71 SL Time-out 4
72 SL Time-out 5
73 SL Time-out 6
Danfoss A/S © 2024.03
Selection description
Mains voltage is outside the specified voltage range.
See P 9.4.3.1 Function Relay [25] for description.
A warning is active.
A trip alarm is active.
A trip lock alarm is active.
Use result of comparator 0 in logic rule.
Use result of comparator 1 in logic rule.
Use result of comparator 2 in logic rule.
Use result of comparator 3 in logic rule.
Use result of logic rule 0 in logic rule.
Use result of logic rule 1 in logic rule.
Use result of logic rule 2 in logic rule.
Use result of logic rule 3 in logic rule.
Use result of timer 0 in logic rule.
Use result of timer 1 in logic rule.
Use result of timer 2 in logic rule.
Use value of DI1 in logic rule.
Use value of DI2 in logic rule.
Use value of DIO in logic rule.
Use value of DI3 in logic rule.
This event is True, if frequency converter is started by any means
(digital input or other).
This event is True, if frequency converter is stopped or coasted by
any means (digital input or other).
An auto reset is performed.
Use result of comparator 4 in logic rule.
Use result of comparator 5 in logic rule.
Use result of logic rule 4 in logic rule.
Use result of logic rule 5 in logic rule.
Use result of timer 3 in logic rule.
Use result of timer 4 in logic rule.
Use result of timer 5 in logic rule.
Use result of timer 6 in logic rule.
AB413939445838en-000301 / 130R1254 |
213