Configuring Multi-Speed Control Mode - Danfoss iC2 Application Manual

Application Guide | iC2-Micro Frequency Converters
Table 16: Process Control Mode Default Settings (continued)
Category
AI1 - T33
AI2 - T34
AO1 - T42
Relay
PID
Jog
External reference

Configuring Multi-Speed Control Mode

5.5.4
Multi-speed control mode allows to use 2 digital inputs for 4 different speeds. By using 1 more digital input, 8 speeds are possible.
Danfoss A/S © 2024.03
Parameter index Parameter name
9.5.2.1 T33 mode
9.5.2.2 T33 High Voltage
9.5.2.3 T33 Low Voltage
T33 High Ref./Feedb.
9.5.2.6
Value
9.5.2.7 T33 Low Ref./Feedb.
Value
9.5.3.1 T34 mode
9.5.3.4 T34 High Current
9.5.3.5 T34 Low Current
9.5.3.6 T34 High Ref./Feedb.
Value
9.5.3.7 T34 Low Ref./Feedb.
Value
9.5.1.1 T31 Mode
9.5.1.2 T31 Analog Output
9.4.3.1 Function Relay
5.12.4.1 Feedback 1 Resource
5.12.5.7 PID Normal / Inverse
Control
5.9.2 Jog Reference
5.9.1 Jog Ramp Time
5.5.3.5 Reference Function
5.5.3.7 Reference 1 Source
5.5.3.8 Reference 2 Source
5.5.3.9 Reference 3 Source
Default setting Parameter number
[1] Voltage Mode 619
10V 611
0.07 V 610
50 615
0 614
[0] Current Mode 629
20.00 mA 623
4.00 mA 622
50. If [1] North Amer- 625
ica is selected for
P 1.2.1 Regional
Settings, the default
value is 60.
0 624
[0] 0-20mA 690
[100] Output Fre- 691
quency
[9] Fault 540
[2] Analog Input 34 720
[0] Normal 730
5.0 311
3 s 380
[0] Sum 304
[1] Analog Input 33 315
[0] Function 316
[0] Function 317
AB413939445838en-000301 / 130R1254 |
59