Danfoss iC2 Application Manual page 243

Application Guide | iC2-Micro Frequency Converters
P 9.4.3.2 Relay ON-Delay
Enter the delay of the relay cut-in time.
Default value:
0.01
Parameter
541
number:
Data type:
uint16
Selected
event
Relay
output
P 9.4.3.2 Relay
ON-Delay
Selected
event
Relay
output
P 9.4.3.2 Relay
ON-Delay
Figure 82: On Delay, Relay
P 9.4.3.3 Relay OFF-Delay
Enter the delay of the relay cut-out time. See P 9.4.3.1 Function Relay. If the selected-event condition changes before a delay timer
expires, the relay output is unaffected.
Default value:
0.01
Parameter
542
number:
Data type:
uint16
Selected
event
Relay
output
P 9.4.3.2 Relay
ON-Delay
Figure 83: Off Delay, Relay
Danfoss A/S © 2024.03
P 9.4.3.3 Relay
OFF-Delay
P 9.4.3.3 Relay
OFF-Delay
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
AB413939445838en-000301 / 130R1254 |
Range (0.00–600.00)
s
Read/Write
Range (0.00–600.00)
s
Read/Write
243