Danfoss iC2 Application Manual page 145

Application Guide | iC2-Micro Frequency Converters
Parameter
1685
number:
Data type:
uint16
P 5.1.27 FC Port REF 1
Use this parameter to view the last received reference from the FC port.
Default value:
0
Parameter
1686
number:
Data type:
int16
Protection (Menu Index 5.2)
7.6.2
P 5.2.1 Warning Reference High
Use this parameter to set the high limit for the reference range. When the actual reference exceeds this limit, warning bit 19 is set in P
5.1.9 Ext. Status Word. The output relay or the digital output can be configured to indicate this warning. The warning indicator light of
the control panel is not turned on when this limit is reached.
Default value:
4999.000
Parameter
455
number:
Data type:
int32
P 5.2.2 Warning Reference Low
Use this parameter to set the low limit for the reference range. When the actual reference exceeds this limit, warning bit 20 is set in P
5.1.9 Ext. Status Word. The output relay or the digital output can be configured to indicate this warning. The warning indicator light of
the control panel is not turned on when this limit is reached.
Default value:
-4999.000
Parameter
454
number:
Data type:
int32
P 5.2.3 Warning Feedback High
Use this parameter to set the high limit for the feedback range. When the feedback exceeds this limit, warning bit 5 is set in P 5.1.9
Ext.Status Word. The output relay or the digital output can be configured to indicate this warning. The warning indicator light of the
control panel is not turned on when this limit is reached.
Default value:
4999.000
Parameter
457
number:
Data type:
int32
Danfoss A/S © 2024.03
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
AB413939445838en-000301 / 130R1254 |
–
Read
Range (-32768–32767)
–
Read
Range (-4999.000–4999.000)
–
Read/Write
Range (-4999.000–4999.000)
–
Read/Write
Range (-4999.000–4999.000)
ProcessCtrlUnit
Read/Write
145