Menu Group Screen And Navigation - Danfoss iC2 Application Manual

Application Guide | iC2-Micro Frequency Converters
Figure 3: Home Screen
Press Up/Down buttons of the control panel to toggle between the readout items.
Readouts in Local mode: The following readouts can be accessed from the control panel status menu in Local mode.
Reference Setting (Hz)
l
Output Frequency (Hz)
l
Motor Current (A)
l
Torque (Nm)
l
Udc Voltage (V)
l
Power (kW)
l
Customer Readout (Unit)*
l
Readouts in Remote mode: The following readouts cab be accessed from the control panel status menu in Remote mode.
Output Frequency (Hz)
l
Motor Current (A)
l
Torque (Nm)
l
Udc Voltage (V)
l
Power (kW)
l
Reference (%)
l
Customer Readout (Unit)*
l
Feedback (Unit)*
l
* indicates that the status is only shown when the corresponding function is enabled.

Menu Group Screen and Navigation

3.2.4.3
Overview of Menu Group Screen and Navigation
3.2.4.3.1
Using the Home/Menu button allows to toggle between readout screens and parameter group screen.
The Menu consists of the following:
Quick Access: A start-up wizard to easy configuration of motor settings and starting the motor. Using quick access enables to set up
l
motor data, application selection setups, and motor control settings in a step-by-step method.
All Parameters: To view all the parameters in the iC2-Micro Frequency Converters.
l
Events Information: To view all active and history events such as faults, in the iC2-Micro Frequency Converters.
l
Press the Up/Down button of the control panel to select the menu functions, as shown in the figure below.
Quick Access
Figure 4: Menu Functions
24
| Danfoss A/S © 2024.03
All Parameters
Events Information
AB413939445838en-000301 / 130R1254