Danfoss iC2 Application Manual page 209

Application Guide | iC2-Micro Frequency Converters
Selection number Selection name
42 Auto Reset Trip
50 Comparator 4
51 Comparator 5
60 Logic rule 4
61 Logic rule 5
70 SL Time-out 3
71 SL Time-out 4
72 SL Time-out 5
73 SL Time-out 6
74 SL Time-out 7
83 Lost Load
P 8.4.5.2 Logic Rule Operator 1
Select the 1st logical operator to use on the Boolean inputs from P 8.4.5.1 Logic Rule Boolean 1 and P 8.4.5.3 Logic Rule Boolean 2. This is
an array parameter containing logical operators 0–5.
Default value:
0
Parameter
1341
number:
Data type:
enum
The following are the selections for the parameter.
Selection number Selection name
0 Disabled
1 AND
2 OR
3 AND NOT
4 OR NOT
5 NOT AND
6 NOT OR
Danfoss A/S © 2024.03
Selection description
An auto reset is performed.
Use result of comparator 4 in logic rule.
Use result of comparator 5 in logic rule.
Use result of logic rule 4 in logic rule.
Use result of logic rule 5 in logic rule.
Use result of timer 3 in logic rule.
Use result of timer 4 in logic rule.
Use result of timer 5 in logic rule.
Use result of timer 6 in logic rule.
Use result of timer 7 in logic rule.
Lost load is performed.
Parameter type:
Unit:
Access type:
Selection description
Ignores P 8.4.5.3 Logic Rule Boolean 2, P 8.4.5.4 Logic Rule
Operator 2, and P 8.4.5.5 Logic Rule Boolean 3.
Evaluates expression P 8.4.5.1 Logic Rule Boolean 1 AND P 8.4.5.3
Logic Rule Boolean 2.
Evaluates expression P 8.4.5.1 Logic Rule Boolean 1 OR P 8.4.5.3
Logic Rule Boolean 2.
Evaluates expression P 8.4.5.1 Logic Rule Boolean 1 AND NOT P
8.4.5.3 Logic Rule Boolean 2.
Evaluates expression P 8.4.5.1 Logic Rule Boolean 1 OR NOT P
8.4.5.3 Logic Rule Boolean 2.
Evaluates expression NOT P 8.4.5.1 Logic Rule Boolean 1 AND P
8.4.5.3 Logic Rule Boolean 2.
Evaluates expression NOT P 8.4.5.1 Logic Rule Boolean 1 OR P
8.4.5.3 Logic Rule Boolean 2.
AB413939445838en-000301 / 130R1254 |
Selection
–
Read/Write
209