Mydrive® Insight; Overview Of Mydrive® Insight - Danfoss iC2 Application Manual

Application Guide | iC2-Micro Frequency Converters
1-(1)
1(1) 0.0 Hz
Ramp
5.5.4.1 Ramp 1 Type Selec
5.5.4.2 Ramp 1 Accel. Time
2-(1)
1(1) 0.0 Hz
Ramp 1 Accel. Time
0003.00 s
3
1(1) 0.0 Hz
Ramp 1 Accel. Time
0005.00 s
Figure 18: Changing Value in a Parameter
MyDrive® Insight
3.3
Overview of MyDrive® Insight
3.3.1
MyDrive® Insight is a platform-independent software tool that supports the commissioning, engineering, and monitoring of iC2-Micro
Frequency Converters. Some of the key features include:
Fast and easy configuration and commissioning.
l
Monitor the drives as part of daily operations.
l
Collect data and information for troubleshooting, maintenance, and service.
l
Discovery of and access to multiple drives in a network.
l
Intuitive user interface.
l
Notifications and visualizations on real-time information and events about the drive.
l
PC control to perform operations such as starting or stopping the drive, set references, set direction, reset, and coast of the drive.
l
Perform updates on single drives.
l
Backup and restore of parameter settings.
l
Data logging and analyzing for troubleshooting.
l
The section is documented for MyDrive® Insight version 2.13.0 or above. Make sure to uninstall lower versions of MyDrive® Insight
from your device to use the latest MyDrive® Insight functions.
The section MyDrive® Insight in the application guide covers basic information such as getting started with MyDrive® Insight,
accessing and viewing or changing the parameters, and PC control to operate the drive using MyDrive® Insight. For further
information on the different MyDrive screens, integrated help within MyDrive® Insight will be available in future releases.
34
| Danfoss A/S © 2024.03
LOC
1(1)
Ramp 1 Accel. Time
LOC 1(1)
Ramp 1 Accel. Time
LOC 1(1)
Ramp 1 Accel. Time
1-(2)
0.0 Hz
3.00 s
2-(2)
0.0 Hz
0003.00 s
4
0.0 Hz
5.00 s
NOTICE
NOTICE
LOC
LOC
LOC
AB413939445838en-000301 / 130R1254