Pc Control To Operate The Drive Using Mydrive® Insight - Danfoss iC2 Application Manual

Application Guide | iC2-Micro Frequency Converters
Table 12: Legend Table (continued)
Number Field Name
4 Selection para-
meters
Default
5
6 Range of para-
meters
Unit
7
Number
8
9 Help
10 Favorite
11 Edit and reset
columns
PC Control to Operate the Drive using MyDrive® Insight
3.3.5
To operate the drive using PC control, click control panel button in MyDrive® Insight.
drive via MyDrive® Insight.
40
| Danfoss A/S © 2024.03
Description
To see all selections available for the parameter, click the value in the Value field.
The factory setting (default value) of the parameter.
The parameter value can be modified based on the ranges defined (maximum and minimum val-
ues).
When applicable, the user unit of the parameter is shown in the Unit field.
Parameter number (PUN) is the unique identifier of a parameter for modbus registers. See
Parameter Number (PNU).
Click the ? button to see description about the parameter. For more detailed descriptions, see
Reading the Parameter Table.
To add parameters to Favorites, click the button.
Use the 3 dots icon to select the required column types or reset all columns. The columns sequence
could be changed with click, hold, and drag.
Figure 26 shows the different screens to operate the
AB413939445838en-000301 / 130R1254
6.1.6.2.8
7.1