Danfoss iC2 Application Manual page 38

Application Guide | iC2-Micro Frequency Converters
Table 11: Legend Table
Legend Name
1 Parameter group
2 Search button
3 Value field
4 PC control button
Navigate through different parameter groups
In this example, parameter group 4 Motor is considered, as shown.
Figure 23: Navigating to a Parameter Group
1. Click the parameter group from All Parameters screen.
2. Click the parameter subgroup.
3. Repeat step 2, until the right level of parameter subgroup is reached to find the specific parameters (4).
When in a specific parameter subgroup, only parameters relevant to the parameter subgroup can be accessed.
Searching for a specific parameter
1. In the Search field, type the required keyword. A keyword can be the name of a parameter group, a parameter subgroup, or a specific
parameter name or parameter number.
In the example, motor control is considered. The parameter group and the specific parameter can be accessed from the search results.
38
| Danfoss A/S © 2024.03
Description
Navigate through the different parameter groups in the drive.
To find a specific parameter.
View and change a parameter value or selection. On the Live screen, all the parameters for the drive
are shown in MyDrive® Insight.
Switch to PC control to start or stop the drive, using MyDrive® Insight.
NOTICE
AB413939445838en-000301 / 130R1254