Danfoss iC2 Application Manual page 160

Application Guide | iC2-Micro Frequency Converters
Selection number
11
21
P 5.5.3.8 Reference 2 Source
Use this parameter to select the input for the 2nd reference signal. The parameters P 5.5.3.7 Reference 1 Source, P 5.5.3.8 Reference 2
Source, and P 5.5.3.9 Reference 3 Source define up to 3 different reference signals. The sum of these reference signals defines the actual
reference.
Default value:
2 [Analog Input 34]
Parameter
316
number:
Data type:
enum
The following are the selections for the parameter.
Selection number
0
1
2
8
11
21
P 5.5.3.9 Reference 3 Source
Use this parameter to select the input for the 3rd reference signal. P 5.5.3.7 Reference 1 Source, P 5.5.3.8 Reference 2 Source, andP 5.5.3.9
Reference 3 Source define up to 3 different reference signals. The sum of these reference signals defines the actual reference.
Default value:
11 [Local bus reference]
Parameter
317
number:
Data type:
enum
The following are the selections for the parameter.
Selection number
0
1
2
8
160
| Danfoss A/S © 2024.03
Selection name
Local bus reference
Potentiometer
Parameter type:
Unit:
Access type:
Selection name
No function
Analog Input 33
Analog Input 34
Frequency Input 18
Local Bus reference
Potentiometer
Parameter type:
Unit:
Access type:
Selection name
No function
Analog Input 33
Analog Input 34
Frequency Input 18
Selection
–
Read/Write
Selection
–
Read/Write
AB413939445838en-000301 / 130R1254