Danfoss iC2 Application Manual page 215

Application Guide | iC2-Micro Frequency Converters
Selection number Selection name
29 Logic rule 3
30 SL Time-out 0
31 SL Time-out 1
32 SL Time-out 2
33 Digital input T13
34 Digital input T14
35 Digital input T15
36 Digital input T17
39 Start command
40 Drive stopped
42 Auto Reset Trip
50 Comparator 4
51 Comparator 5
60 Logic rule 4
61 Logic rule 5
70 SL Time-out 3
71 SL Time-out 4
72 SL Time-out 5
73 SL Time-out 6
74 SL Time-out 7
83 Lost Load
P 8.4.6.2 Action
Select the action corresponding to the SLC event. Actions are executed when the corresponding event (defined in P 8.4.6.1 Event) is
evaluated as TRUE. This is an array parameter containing SLC actions 0–19.
Default value:
0
Parameter
1352
number:
Data type:
enum
The following are the selections for the parameter.
Danfoss A/S © 2024.03
Selection description
Use result of logic rule 3 in logic rule.
Use result of timer 0 in logic rule.
Use result of timer 1 in logic rule.
Use result of timer 2 in logic rule.
Use value of DI1 in logic rule.
Use value of DI2 in logic rule.
Use value of DIO in logic rule.
Use value of DI3 in logic rule.
This event is True, if frequency converter is started by any means
(digital input or other).
This event is True, if frequency converter is stopped or coasted by
any means (digital input or other).
An auto reset is performed.
Use result of comparator 4 in logic rule.
Use result of comparator 5 in logic rule.
Use result of logic rule 4 in logic rule.
Use result of logic rule 5 in logic rule.
Use result of timer 3 in logic rule.
Use result of timer 4 in logic rule.
Use result of timer 5 in logic rule.
Use result of timer 6 in logic rule.
Use result of timer 7 in logic rule.
Lost load is performed.
Parameter type:
Unit:
Access type:
AB413939445838en-000301 / 130R1254 |
Selection
–
Read/Write
215