Danfoss iC2 Application Manual page 178

Application Guide | iC2-Micro Frequency Converters
Parameter
1892
number:
Data type:
int16
P 5.12.1.4 Process PID Gain Scaled Output
This parameter shows the output value from the process PID controller after reaching a clamp limit and scaling the resulting value with
consideration to the gain.
Default value:
0.0
Parameter
1893
number:
Data type:
int16
P 5.12.1.5 Feedback Value
Use this parameter to view the feedback resulting from the selection of scaling in P 5.5.3.1 Reference Range, P 5.5.3.3 Reference
Maximum, and P 5.5.3.4 Reference Minimum.
Default value:
0.000
Parameter
1652
number:
Data type:
int32
Feedback (Menu Index 5.12.4)
7.6.11.2
P 5.12.4.1 Feedback 1 Resource
Use this parameter to select which drive input is treated as the feedback source.
Default value:
0 [No function]
Parameter
720
number:
Data type:
enum
The following are the selections for the parameter:
Selection number
0
1
2
4
P 5.12.4.2 Feedback 2 Resource
Use this parameter to select which drive input is treated as the source of the feedback.
178
| Danfoss A/S © 2024.03
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Selection name
No function
Analog Input 33
Analog Input 34
Frequency Input 18
%
Read
Range (-200.0–200.0)
%
Read
Range (-4999.000–4999.000)
Process Ctrl Unit
Read
Selection
–
Read/Write
AB413939445838en-000301 / 130R1254