Danfoss iC2 Application Manual page 158

Application Guide | iC2-Micro Frequency Converters
Selection number
132
140
141
145
150
160
170
171
172
173
180
P 5.5.3.3 Reference Maximum
Use this parameter to set the maximum reference. The maximum reference is the highest value obtainable by summing all references.
The maximum reference unit matches the configuration inP 5.4.2 Configuration Mode.
Default value:
Size Related
Parameter
303
number:
Data type:
int32
P 5.5.3.4 Reference Minimum
Use this parameter to set the minimum reference. The minimum reference is the lowest value obtainable by summing all references.
Minimum reference is active only when P 5.5.3.1 Reference Range is set to [0] Min.- Max. The minimum reference unit matches the choice
of configuration in P 5.4.2 Configuration Mode.
Default value:
0.000
Parameter
302
number:
Data type:
int32
P 5.5.3.5 Reference Function
Use this parameter to select which reference source to use. To sum both external and preset reference sources, select [0] Sum. To use
either the preset or the external reference source, select [1] External/Preset.
Default value:
0 [Sum]
Parameter
304
number:
Data type:
enum
158
| Danfoss A/S © 2024.03
Selection name
lb/h
ft/s
ft/min
ft
lb ft
°F
psi
lb/in²
in WG
ft WG
HP
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Range (-4999.000–4999.000)
Reference Feedback Unit
Read/Write
Range (-4999.000–4999.000)
Reference Feedback Unit
Read/Write
Selection
–
Read/Write
AB413939445838en-000301 / 130R1254