Danfoss iC2 Application Manual page 217

Application Guide | iC2-Micro Frequency Converters
Selection number Selection name
72 Start Timer 5
73 Start Timer 6
74 Start Timer 7
100 ResetAlarm
I/O (Menu Index 9)
7.9
I/O (Menu Index 9.3)
7.9.1
I/O Status (Menu Index 9.3)
7.9.1.1
P 9.3.1 Digital Input Status
View actual state of the digital inputs. The value should be analyzed using binary type. 0=no signal, 1=connected signal. From the right
side to the left, bit 0, 2, 3, 4, 5 represent DI 18, 17, 15, 14, 13, respectively.
Default value:
0
Parameter
1660
number:
Data type:
uint16
The following are the bit descriptions.
Bit number
Bit 0
Bit 2
Bit 3
Bit 4
Bit 5
P 9.3.2 Digital Output Status
View the binary value of all digital outputs. (0=low output, 1=high output, '_'=Not digital output configuration). From the right side to
the left, bit 3 represent DO 15.
Default value:
0
Parameter
1666
number:
Data type:
uint16
The following are the bit descriptions.
Danfoss A/S © 2024.03
Selection description
Starts timer 5.
Starts timer 6.
Starts timer 7.
Reset the alarm.
Parameter type:
Unit:
Access type:
Bit description
Digital input terminal 18
Digital input terminal 17
Digital input terminal 15
Digital input terminal 14
Digital input terminal 13
Parameter type:
Unit:
Access type:
AB413939445838en-000301 / 130R1254 |
Range (0–4095)
–
Read
Range (0–63)
–
Read
217