Application Guide | iC2-Micro Frequency Converters
Figure 20: Serial Connection
5.
Once the connection is established, the Device Info view is shown.
Accessing Parameters and Understanding Parameter Screens in MyDrive® Insight
3.3.3
Accessing parameters
1. To access the parameters of the connected drive, click Setup & Service. This opens the menus related to Setup & Service.
2. Click Parameters → Live, as shown.
36
| Danfoss A/S © 2024.03
AB413939445838en-000301 / 130R1254
Need help?
Do you have a question about the iC2 and is the answer not in the manual?