Danfoss iC2 Application Manual page 179

Application Guide | iC2-Micro Frequency Converters
Default value:
0 [No function]
Parameter
722
number:
Data type:
enum
The following are the selections for the parameter:
Selection number
0
1
2
4
P 5.12.4.3 Feedback 1 Conversion
Use this parameter to select a conversion for the Feedback 1 signal. To leave the feedback signal unchanged, select [0] Linear.
Default value:
0 [Linear]
Parameter
760
number:
Data type:
enum
The following are the selections for the parameter:
Selection number
0
1
P 5.12.4.4 Feedback 2 Conversion
Use this parameter to select a conversion for the Feedback 2 signal. To leave the feedback signal unchanged, select [0] Linear.
Default value:
0 [Linear]
Parameter
762
number:
Data type:
enum
The following are the selections for the parameter:
Selection number
0
1
Danfoss A/S © 2024.03
Parameter type:
Unit:
Access type:
Selection name
No function
Analog Input 33
Analog Input 34
Frequency Input 18
Parameter type:
Unit:
Access type:
Selection name
Linear
Square root
Parameter type:
Unit:
Access type:
Selection name
Linear
Square root
AB413939445838en-000301 / 130R1254 |
Selection
–
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
179