Backing Up The Drive - Danfoss iC2 Application Manual

Application Guide | iC2-Micro Frequency Converters
Figure 26: Operate Drive using MyDrive® Insight
To access PC Control in MyDrive® Insight and operate the drive, perform the following:
1.
Click the REQUEST CONTROL button.
2.
Click Continue, to confirm secure operation conditions, while controlling the drive using MyDrive® Insight.
3. Use the START, STOP, STOP COAST buttons to perform a drive operation.
4.
Increase or decrease the reference speed.
5.
In case of a fault event, click RESET FAULTS to reset a drive.

Backing Up the Drive

3.3.6
To back up the drive, select a drive, go to Setup & Services → Parameters.
1.

The Parameters Live screen appears.
2.
Click the icon as shown in the figure.
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 |
41