Table of Contents
Advertisement
Application Guide | iC2-Micro Frequency Converters
Parameter
1412
number:
Data type:
enum
The following are the selections for the parameter.
Selection number
Selection name
0
Trip
1
Warning
2
Disabled
4
Fast Trip
5
Fast Warning
Power Conversion & DC-link (Menu Index 2)
7.3
Status (Menu Index 2.1)
7.3.1
P 2.1.1 DC-Link voltage
View the DC-link voltage in the drive.
Default value:
0
Parameter
1630
number:
Data type:
uint32
P 2.1.2 Inverter Thermal
View the percentage of thermal load on the frequency converter.
Default value:
0
Parameter
1635
number:
Data type:
uint8
P 2.1.3 Unit Nominal Current
View the inverter nominal current, which should match the nameplate data on the connected motor. The data is used for calculation of
torque and motor overload protection.
Default value:
Size Related
108
| Danfoss A/S © 2024.03
Unit:
Access type:
Selection description
Trips the frequency converter.
Issue a warning.
No action is taken.
Enable the fast detection to trip the frequency converter. The
option is related to P 2.3.9 Fast Mains Phase Loss Level and P
2.3.10 Fast Mains Phase Loss Min Power.
Enable the fast detection to issue a warning. The option is related
to P 2.3.9 Fast Mains Phase Loss Level and P 2.3.10 Fast Mains
Phase Loss Min Power.
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
–
Read/Write
Range (0–65535)
V
Read
Range (0–255)
%
Read
Range (0.00–655.35)
AB413939445838en-000301 / 130R1254
Advertisement
Table of Contents
