Danfoss iC2 Application Manual page 201

Application Guide | iC2-Micro Frequency Converters
Default value:
0
Parameter
1638
number:
Data type:
uint8
P 8.4.1.2 Counter A
View the present value of Counter A. Counters are useful as comparator operands, see P 8.4.3.1 Comparator Operand. The value can be
reset or changed either via digital inputs (parameter group P 9.4 Digital Inputs/Outputs) or by using an SLC action (P 8.4.6.2 Action).
Default value:
0
Parameter
1672
number:
Data type:
int16
P 8.4.1.3 Counter B
View the present value of Counter B. Counters are useful as comparator operands, see P 8.4.3.1 Comparator Operand. The value can be
reset or changed either via digital inputs (parameter group P 9.4 Digital Inputs/Outputs) or by using an SLC action (P 8.4.6.2 Action).
Default value:
0
Parameter
1673
number:
Data type:
int16
SLC Settings (Menu Index 8.4.2)
7.8.2.3
Use SLC settings to activate, deactivate, and reset the Smart Logic Control.
P 8.4.2.1 Enable Controller
Enable or disable the Smart Logic Control.
Default value:
0
Parameter
1300
number:
Data type:
enum
The following are the selections for the parameter.
Selection number Selection name
0 Off
1 On
P 8.4.2.2 Start Controller
Select the condition (TRUE or FALSE) to activate the Smart Logic Controller.
Danfoss A/S © 2024.03
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Selection description
Enable the start of Smart Logic Control when a start command is
present, for example, via a digital input.
Disable the Smart Logic Control.
AB413939445838en-000301 / 130R1254 |
Range (0–20)
–
Read
Range (-32768–32767)
–
Read
Range (-32768–32767)
–
Read
Selection
–
Read/Write
201