Danfoss iC2 Application Manual page 239

Application Guide | iC2-Micro Frequency Converters
Selection number Selection name
161 Running Reverse
165 Local Ref. Active
166 Remote Ref. Active
167 Start Command Active
168 Drive in Local Mode
169 Drive in Remote Mode
193 Sleep Mode
194 Lost Load Function
P 9.4.2.3 T15 DO ON-Delay
Enter the digital output on delay time.
Default value:
0.01
Parameter
534
number:
Data type:
uint16
P 9.4.2.4 T15 DO OFF-Delay
Enter the digital output Off delay time.
Default value:
0.01
Parameter
535
number:
Data type:
uint16
Relay (Menu Index 9.4.3)
7.9.2.3
P 9.4.3.1 Function Relay
Select the function to control the output relays.
Default value:
9
Parameter
540
number:
Data type:
enum
The following are the selections for the parameter.
Danfoss A/S © 2024.03
Selection description
The output is high when the frequency converter is running
counterclockwise (the logical product of the status bits Running
AND Reverse).
The output is high when local reference is activated.
The output is high when remote reference is activated.
The output is high when there is an active start command, and
no stop command is active.
The output is high when the frequency converter is in Local
mode.
The output is high when the frequency converter is in Remote
mode.
The frequency converter/system has entered sleep mode.
A lost-load condition is detected.
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
AB413939445838en-000301 / 130R1254 |
Range (0.00–600.00)
s
Read/Write
Range (0.00–600.00)
s
Read/Write
Selection
–
Read/Write
239