Danfoss iC2 Application Manual page 205

Application Guide | iC2-Micro Frequency Converters
Default value:
0
Parameter
1303
number:
Data type:
enum
The following are the selections for the parameter.
Selection number Selection name
0 Do not reset SLC
1 Reset SLC
Comparators (Menu Index 8.4.3)
7.8.2.4
Comparators are used for comparing continuous variables (output frequency, output current, analog input, and so on) to fixed preset
values.
P 8.4.3.1
Comparator Operand
P 8.4.3.3
Comparator Value
Figure 79: Comparator Parameters
In addition, there are digital values which are compared to fixed time values. See explanation in P 8.4.3.1 Comparator Operand.
Comparators are evaluated once in each scan interval. Use the result (TRUE or FALSE) directly. All parameters in this parameter group are
array parameters with index 0–5. Select index 0 to program Comparator 0, select index 1 to program Comparator 1, and so on.
P 8.4.3.1 Comparator Operand
Select the variable to be monitored by the comparator. This is an array parameter containing comparators 0–5.
Default value:
1
Parameter
1310
number:
Data type:
enum
The following are the selections for the parameter.
Selection number Selection name
0 Disabled
1 Reference
2 Feedback
3 Motor speed
Danfoss A/S © 2024.03
P 8.4.3.2
Comparator Operator
=
TRUE longer than.
. . .
. . .
Parameter type:
Unit:
Access type:
Selection description
Do not reset SLC.
Reset all SLC parameters to default settings.
Parameter type:
Unit:
Access type:
Selection description
Comparator is disabled.
Resulting remote reference (not local) as a percentage.
Feedback in [Hz].
Motor speed in [Hz].
AB413939445838en-000301 / 130R1254 |
Selection
–
Read/Write
Selection
–
Read/Write
205