Nameplate Data (Menu Index 4.2.2) - Danfoss iC2 Application Manual

Application Guide | iC2-Micro Frequency Converters
Parameter
143
number:
Data type:
uint16
In some products, depending on the EMC configuration, this parameter may adjust the allowable switching frequency automatically to
achieve optimum performance of the drive system.

Nameplate Data (Menu Index 4.2.2)

7.5.2.2
P 4.2.2.1 Nominal Power
Set the nominal motor power from the motor nameplate data. Note: Changing this parameter affects the settings of other parameters.
Default value:
Size Related
Parameter
120
number:
Data type:
uint16
P 4.2.2.2 Nominal Voltage
Set the nominal motor voltage from the motor nameplate data. Note: Changing this parameter affects settings of other parameters.
Default value:
Size Related
Parameter
122
number:
Data type:
uint16
P 4.2.2.3 Nominal Current
Enter the nominal motor current value from the motor nameplate data. Note: Changing this parameter affects the settings of other
parameters.
Default value:
Size Related
Parameter
124
number:
Data type:
uint32
P 4.2.2.4 Nominal Frequency
Select the motor frequency value from the motor nameplate data. Note: Changing this parameter affects settings of other parameters.
Default value:
Size Related
Parameter
123
number:
Data type:
uint16
P 4.2.2.5 Nominal Speed
Enter the nominal motor speed value from the motor nameplate data. Note: Changing this parameter affects settings of other
parameters.
Danfoss A/S © 2024.03
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
AB413939445838en-000301 / 130R1254 |
Ft
Read/Write
Range (Size Related)
kW
Read/Write
Range (50–1000)
V
Read/Write
Range (0.01–1000.00)
A
Read/Write
Range (Size Related)
Hz
Read/Write
125