Danfoss iC2 Application Manual page 191

Application Guide | iC2-Micro Frequency Converters
Software Information (Menu Index 6.2)
7.7.2
P 6.2.1 Application Version
Use this parameter to view the combined software version consisting of power software and control software.
Default value:
–
Parameter
1543
number:
Data type:
VisibleString
P 6.2.2 SW ID Control Card
Use this parameter to view the control board software version number.
Default value:
–
Parameter
1549
number:
Data type:
VisibleString
P 6.2.3 SW ID Power Card
Use this parameter to view the power card software version number.
Default value:
–
Parameter
1550
number:
Data type:
VisibleString
P 6.2.7 ECP SW Version
View the ECP ID number.
Default value:
–
Parameter
1548
number:
Data type:
VisibleString
Cooling Fan (Menu Index 6.5)
7.7.3
P 6.5.1 Fan Control Mode
Use this parameter to select the fan control mode.
Default value:
7 [On when Inverter is on, otherwise off]
Parameter
1452
number:
Data type:
enum
Danfoss A/S © 2024.03
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
AB413939445838en-000301 / 130R1254 |
–
–
Read
–
–
Read
–
–
Read
–
–
Read
Selection
–
Read/Write
191