Understanding Access Types; Grid (Menu Index 1); Grid Settings (Menu Index 1.2) - Danfoss iC2 Application Manual

Application Guide | iC2-Micro Frequency Converters
Table 61: Overview on data type (continued)
Data type
uint
visStr

Understanding Access Types

7.1.3
Following are the access type of parameters and descriptions.
Table 62: Access Types and Descriptions
Access type
Read/Write
Read

Grid (Menu Index 1)

7.2

Grid Settings (Menu Index 1.2)

7.2.1
P 1.2.1 Regional Settings
Use the parameter to configure regional settings. Select [0] International to set P 4.2.2.4 Nominal Frequency to 50 Hz. Select [1] North
America to set P 4.2.2.4 Nominal Frequency to 60 Hz.
Default value:
0 [International]
Parameter
3
number:
Data type:
enum
The following are the selections for the parameter.
Selection number Selection name
0 International
1 North America
P 1.2.2 Grid Type
Select the supply voltage, frequency, and type.
Default value:
12 [380-440V/50Hz]
Parameter
6
number:
Data type:
enum
The following are the selections for the parameter.
106
| Danfoss A/S © 2024.03
Description
Unsigned integer
Visible string
Type
8, 16, 32
Descriptions
The setting of the parameter is readable or changeable.
The parameter information is only readable.
Parameter type:
Unit:
Access type:
Selection description
Default value of P 4.2.2.4 Nominal Frequency is set to 50 Hz.
Default value of P 4.2.2.4 Nominal Frequency is set to 60 Hz.
Parameter type:
Unit:
Access type:
Range
0 up to 65535
All strings
Selection
–
Read/Write
Selection
–
Read/Write
AB413939445838en-000301 / 130R1254