Danfoss iC2 Application Manual page 258

Application Guide | iC2-Micro Frequency Converters
Selection number
5
6
7
P 10.1.4 Parity/Stop Bits
Parity and stop bits for the protocol using the FC port. For some of the protocols, not all options are available.
Default value:
0 [Even Parity, 1 Stop Bit]
Parameter
833
number:
Data type:
enum
The following are the selections for the parameter.
Selection number
0
1
2
3
P 10.1.5 Maximum Response Delay
Specify the maximum allowed delay time between receiving a request and transmitting the response. If this time is exceeded, no
response will be returned.
Default value:
Size Related
Parameter
836
number:
Data type:
uint16
P 10.1.6 Minimum Response Delay
Specify the minimum delay time between receiving a request and transmitting a response. This is used for overcoming modem
turnaround delays.
Default value:
0.010
Parameter
835
number:
Data type:
uint16
258
| Danfoss A/S © 2024.03
Selection name
57600 Baud
76800 Baud
115200 Baud
Parameter type:
Unit:
Access type:
Selection name
Even Parity, 1 Stop Bit
Odd Parity, 1 Stop Bit
No Parity, 1 Stop Bit
No Parity, 2 Stop Bits
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Selection
–
Read/Write
Range (0.100–10.000)
s
Read/Write
Range (1–500)
s
Read/Write
AB413939445838en-000301 / 130R1254