Danfoss iC2 Application Manual page 144

Application Guide | iC2-Micro Frequency Converters
Parameter
1695
number:
Data type:
uint32
P 5.1.16 Reference [Unit]
Use this parameter to view the present value of reference applied in the frequency converter resulting from the choice of configuration
in P 5.4.2 Operation Mode.
Default value:
0.000
Parameter
1601
number:
Data type:
int32
P 5.1.17 Reference [%]
Use this parameter to view the total reference.
Default value:
0.0
Parameter
1602
number:
Data type:
int16
P 5.1.18 External Reference
Use this parameter to view the sum of all external reference sources defined in P 5.5.3.7 Reference 1 Source, P 5.5.3.8 Reference 2
Source, and P 5.5.3.9 Reference 3 Source.
Default value:
0.0
Parameter
1650
number:
Data type:
int16
P 5.1.19 Main Actual Value [%]
Use this parameter to view the Main Actual Value sent from the frequency converter via bus.
Default value:
0.00
Parameter
1605
number:
Data type:
int16
P 5.1.26 FC Port CTW 1
Use this parameter to view the 2 byte control word (CTW) received from the bus master.
Default value:
1084
144
| Danfoss A/S © 2024.03
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
Unit:
Access type:
Parameter type:
–
Read
Range (-4999.000–4999.000)
ReferenceFeedbackUnit
Read
Range (-200.0–200.0)
%
Read
Range (-200.0–200.0)
%
Read
Range (-200.00–200.00)
%
Read
Range (0–65535)
AB413939445838en-000301 / 130R1254