Table of Contents
Advertisement
Central management
Configure multiple IX10 devices by using Digi Remote Manager
configurations
Digi recommends you take advantage of Remote Manager configurations to manage multiple IX10
devices. A Remote Manager configuration is a named set of device firmware, settings, and file system
options. You use the configuration to automatically update multiple devices and to periodically scan
devices to check for compliance with the configuration. See the
more information about Remote Manager configurations.
Typically, if you want to provision multiple IX10 routers:
1. Using the IX10 local WebUI, configure one IX10 router to use as the model configuration for all
subsequent IX10s you need to manage.
2. Register the configured IX10 device in your Remote Manager account.
3. In Remote Manager, create a configuration:
a. From the Dashboard, select Configurations.
b. Click Create.
c. Enter a Name and an optional Description for the configuration, and select the Groups,
Device Type, and Firmware Version.
d. Click Save and continue.
e. Click Import from device and select the device configured above.
f. Click Import.
g. At the Settings page, configure any desired configuration overrides and click Continue.
h. At the File System page, make any desired changes to the files that were imported from
the device and click Continue.
i. At the Automations page, click Enable Scanning, make any other desired changes, and
click Save.
Digi Remote Manager provides multiple methods for applying configurations to registered devices.
You can also include site-specific settings with a profile to override settings on a device-by-device
basis.
IX10 User Guide
Configure multiple IX10 devices by using Digi Remote Manager configurations
Digi Remote Manager User Guide
for
68
Advertisement
Table of Contents
