Table of Contents
Advertisement
Wi-Fi
d. Create a firewall filter to drop traffic from the Internal zone (used by the LAN1 interface)
to the LAN2_isolation_zone:
i. Click Firewall > Packet filtering.
ii. For Add packet filter, click .
iii. For Label, type Drop traffic from Internal to LAN2_isolation_zone.
iv. For Action, select Drop.
v. For Source zone, select Internal.
vi. For Destination zone, select LAN2_isolation_zone.
e. Rearrange the firewall filters.
Firewall filters are applied in the order that they are listed. As a result, in order to drop
traffic from the Internal zone to the LAN2_isolation_zone, this filter must be listed prior
to the Allow all outgoing traffic filter, which allows the Internal zone to have access to
any zone.
To move the Drop traffic from Internal to LAN2_isolation_zone filter to the top of the
list:
i. Click the filter title.
ii. Drag-and-drop the filter to the top of the list.
5. Create a new LAN:
By default, the IX20W device comes with one preconfigured LAN, which includes the default
access point. We will use that LAN for the default access point, and create a new LAN for the
second access point.
IX20 User Guide
Isolate Wi-Fi clients
216
Advertisement
Table of Contents
