Table of Contents
Advertisement
Interfaces
4. When the Carrier Scan window opens, the results of the most recent previous scan are
displayed. If there is no previous scan available, or to refresh the list, click SCAN.
5. The current carrier is highlighted in green. To switch to a different carrier:
a. Highlight the appropriate carrier and click SELECT.
The Carrier selection dialog opens.
b. For Carrier selection mode, select one of the following:
n
n
Command line
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type:
> modem scan
Issuing network scan, this may take some time...
Status
---------
Available
Available
Available
Available
Available
Available
>
Show cellular status and statistics
You can view a summary status for all cellular modems, or view detailed status and statistics for a
specific modem.
IX20 User Guide
Manual/Automatic: The device will use automatic carrier selection if this carrier is
not available.
Manual: Does not allow the device to use automatic carrier selection if this carrier
is not available.
Note
If Manual is selected, your modem must support the Network technology or
the modem will lose cellular connectivity. If you are using a cellular connection to
perform this procedure, you may lose your connection and the device will no longer
be accessible.
Carrier
PLMN ID
--------
-------
T-Mobile
310260
T-Mobile
310260
AT&T
310410
Verizon
311480
311 490
311490
313 100
313100
Technology
----------
4G
3G
4G
4G
4G
4G
Wide Area Networks (WANs)
102
Advertisement
Table of Contents
