Table of Contents
Advertisement
Diagnostics
iv. (Optional) Set the filter should ignore packets from this IP address/network:
(config network analyzer name filter address 0)> ignore true
(config network analyzer name filter address 0)>
By default, is option is set to false, which means that the filter will capture packets
from this IP address/network.
v. Repeat these steps to add additional IP address filters.
b. To create a filter that either captures or ignores packets that use a particular IP protocol:
i. Add a new IP protocol filter:
(config network analyzer name)> add filter protocol end
(config network analyzer name filter protocol 0)>
ii. Use the ? to determine available protocols and the appropriate format:
(config network analyzer name filter protocol 0)> protocol ?
IP protocol to capture or ignore: IP protocol to capture or
ignore.
Format:
Current value:
(config network analyzer name filter protocol 0)>
iii. Set the protocol:
(config network analyzer name filter protocol 0)> protocol value
(config network analyzer name filter protocol 0)>
iv. If other is set for the protocol, set the number of the protocol:
(config network analyzer name filter protocol 0)> protocol_other
value
(config network analyzer name filter protocol 0)>
where value is an integer between 1 and 255 and represents the the number of the
protocol.
IX20 User Guide
either: The filter will apply to packets when the IP address/network is either
n
the source or the destination.
ah
esp
gre
icmp
icmpv6
igmp
ospf
other
tcp
udp
vrrp
Analyze network traffic
784
Advertisement
Table of Contents
