Table of Contents
Advertisement
Serial port
1. Log into the IX20 WebUI as a user with Admin access.
2. On the menu, click System. Under Configuration, click Serial Configuration.
The Serial Configuration page is displayed.
3.
Note
You can also configure the serial port by using Device Configuration > Serial. Changes
made by using either Device Configuration or Serial Configuration will be reflected in both.
4. Click to expand Port 1.
The serial port is enabled by default. To disable, toggle off Enable.
5. For Mode, select one of the following:
Login: Allows the user to log into the device through the serial port.
n
Remote access: Allows for remote access to another device that is connected to the
n
serial port.
Application: Provides access to the serial device from Python applications. See
n
Python to access serial ports
access the serial port.
Modbus: Allows you to use the serial port for Modbus. See
n
UDP serial: Provides access to the device through a UDP serial port. See
n
serial
The default is Remote.
6. (Optional) For Label, enter a label that will be used when referring to this port.
IX20 User Guide
for information about creating Python applications that
mode.
Configure the serial port
Use
Modbus
gateway.
Configure UDP
168
Advertisement
Table of Contents
