Digi IX20-WAG4 User Manual page 227

Wi-Fi
1. Log into the IX20 WebUI as a user with Admin access.
2. On the main menu, click Status.
3. Under Connections, click Wi-Fi > Access Points.

Command line
Show summary of Wi-Fi access points
To show the status and statistics for Wi-Fi access points, use the
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type show wifi ap:
> show wifi ap
AP
--------
my_AP
digi_ap
>
3. To view information about both active and inactive access points, include the all parameter:
> show wifi ap all
AP
--------
my_AP
digi_ap
digi_ap2
>
Show detailed status and statistics of a specific Wi-Fi access point
To show a detailed status and statistics of a Wi-Fi access point, use the show wifi ap name name
command.
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type show wifi ap name name:
> show wifi ap name my_AP
my_AP Access Point Status
-------------------------
Enabled
Status
IX20 User Guide
Enabled Status SSID
------- ------ -------------
true up my_SSID
true up Digi2
Enabled Status SSID
------- ------ -------------
true up my_SSID
true up Digi2
false down
: true
: up
Show Wi-Fi access point status and statistics
show wifi command.
BSSID
-----------------
01:41:D1:14:36:37
00:40:D0:13:35:36
BSSID
-----------------
01:41:D1:14:36:37
00:40:D0:13:35:36
227