Digi IX20-WAG4 User Manual page 543

Applications
Location (optional)
n
Tuple of latitude, longitude and altitude
l
Description (optional)
n
Quality (optional)
n
An integer describing the quality of the data point
l
For example, to use an interactive Python session to upload datapoints related to velocity,
temperature, and the state of the emergency door:
1. Log into the IX20 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.6.13 (default, May
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the datapoint submodule and other necessary modules:
>>> from digidevice import datapoint
>>> import time
>>>
4. Upload the datapoints to Remote Manager:
>>> datapoint.upload("Velocity", 69, units="mph")
>>> datapoint.upload("Temperature", 24, geo_location=(54.409469, -
1.718836, 129))
>>> datapoint.upload("Emergency_Door", "closed", timestamp=time.time())
5. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().
You can also upload multiple datapoints:
1. Log into the IX20 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.6.13 (default, May
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
IX20 User Guide
9 2021, 22:49:59)
9 2021, 22:49:59)
Digidevice module
543