Table of Contents
Advertisement
Wi-Fi
psk2: Uses WPA2 Personal (PSK) mode. All Wi-Fi clients must support WPA2 to be able
n
to authenticate.
psk2sae: Uses WPA2-PSK/WPA3-AES mixed mode. Wi-Fi clients that support WPA2 and
n
WPA3 are able to authenticate.
sae: Uses WPA3 Personal mode. All Wi-Fi clients must support WPA3 to be able to
n
authenticate.
(config network wifi ap new_AP)> encryption type psk2sae
(config network wifi ap new_AP)>
6. (Optional) Determine whether to prevent clients that are connected to this access point from
communicating with each other:
(config)> network wifi ap digi_ap isolate_clients true
(config)>
See
Isolate Wi-Fi clients
access points from communicating with each other.
7. Set the password that clients will use when connecting to the access point:
(config network wifi ap new_AP)> encryption key_type password
(config network wifi ap new_AP)>
where key_type varies depending on the selection for encryption type, above:
If type is set to psk, key_type is key_psk.
n
If type is set to mixedpsk, key_type is key_mixedpsk.
n
If type is set to psk2, key_type is key_psk2.
n
If type is set to psk2sae, key_type is key_psk2sae.
n
If type is set to sae, key_type is key_sae.
n
For example, if type is set to psk2sae, set key_psk2sae to the appropriate password:
(config network wifi ap new_AP)> encryption type psk2sae
(config network wifi ap new_AP)> encryption key_psk2sae abcd1234
(config network wifi ap new_AP)>
Note
The encryption key type must correspond to the configured encryption type. If you set an
encyrption key type that does not correspond to the configured encryption type, you will not
be able to save the configuration.
8. (Optional) Set the amount of time to wait before changing the group key.
The group key is shared by all in clients of the access point, and after a client has
disconnected, it will be able to use the group key to decrypt broadcast packets until the key is
changed.
(config network wifi ap new_AP)> encryption group_rekey value
(config network wifi ap new_AP)>
where value is any number of days, hours, minutes, or seconds, and takes the format number
{d|h|m|s}.
IX20 User Guide
Configure a Wi-Fi access point with personal security
for information about how to prevent clients connected to different
203
Advertisement
Table of Contents
