Table of Contents
Advertisement
Interfaces
3. Click Network > Interfaces.
4. Select the appropriate WAN or WWAN on which SureLink should be disabled..
5. After selecting the WAN or WWAN, click IPv4 > SureLink.
6. Click to expand Test targets.
7. Click to expand the second test target. This test target has its Test type set to Test DNS
servers configured for this interface.
8. Click the menu icon (...) next to the target and select Delete.
9. Click Apply to save the configuration and apply the change.
Command line
IX20 User Guide
Wide Area Networks (WANs)
79
Advertisement
Table of Contents
