Table of Contents
Advertisement
Interfaces
WebUI
1. Log into the IX20 WebUI as a user with Admin access.
2. On the menu, click Status.
3. Under Connections, click Modems.
The modem status window is displayed
Command line
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show modem
To view a status summary for the modem:
n
> show modem
Modem
-----
modem
>
To view detailed status and statistics, use the
n
> show modem name modem
modem: [Telit] LM940
-------------------------------------------------------------------
-----------
IMEI
Manufacturer
Model
FW Version
Revision
Status
------
State
Signal Strength
Bars
Access Mode
Network Technology (CNTI): LTE
Band
Temperature
wwan1 Interface
---------------
APN
IPv4 surelink
IX20 User Guide
command:
SIM
Status
-------------
---------
1 (ready)
connected
: 781154796325698
: Telit
: LM940
: 24.01.541_ATT
: 24.01.541
: connected
: Good (-85 dBm)
: 2/5
: 4G
: B2
: 34C
: 1234
: passing
Wide Area Networks (WANs)
APN
Signal Strength
---------
--------------------
1234
Good (-84 dBm)
show modem name name
command:
103
Advertisement
Table of Contents
