Dual Boot Behavior - Digi IX20-WAG4 User Manual

System administration
For example:
> scp host 192.168.4.1 user admin remote /home/admin/bin/IX20-
21.8.24.120.bin local /etc/config/ to local
admin@192.168.4.1's password: adminpwd
IX20-21.8.24.120.bin
>
4. Verify that the firmware file has been successfully uploaded to the device:
> ls /etc/config/scripts
-rw-r--r--
21.8.24.120.bin
-rw-r--r--
...
>
5. Update the firmware by entering the
name:
> system firmware update file IX20-21.8.24.120.bin
36632K
netflash: got "/etc/config/IX20-21.8.24.120.bin", length=37511229
netflash: authentication successful
netflash: programming FLASH device /dev/flash/image
36633K 100%
Firmware update completed, reboot device
>
6. Reboot the device to run the new firmware image using the
> reboot
Rebooting system
>
7. Once the device has rebooted, log into the IX20's command line as a user with Admin access
and verify the running firmware version by entering the
> show system
Hostname
FW Version
MAC
Model
Current Time
Uptime
>

Dual boot behavior

By default, the IX20 device stores two copies of firmware in two flash memory banks:
IX20 User Guide
1 root root
1 root root
update firmware
: IX20
: 21.8.24.120
: 0040FF800120
: Digi IX20
: Mon, 13 September 2021 8:04:23 +0000
: 42 seconds (42s)
Update system firmware
100% 36MB
37511229 May 16 20:10 IX20-
2580 May 16 16:44 accns.json
command, specifying the firmware file
reboot command.
show system command.
11.1MB/s 00:03
693