Task Two: Configure The Application To Run Automatically - Digi IX20-WAG4 User Manual

Applications
For example:
To upload a Python application from a remote host with an IP address of 192.168.4.1 to the
/etc/config/scripts directory on the IX20 device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/test.py local
/etc/config/scripts/ to local
admin@192.168.4.1's password: adminpwd
test.py
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Note You can also create Python applications by using the vi command when logged in with shell
access.

Task two: Configure the application to run automatically

Note This feature does not provide syntax or error checking. Certain commands can render the device
inoperable. Use with care.

WebUI
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System > Scheduled tasks > Custom scripts.
IX20 User Guide
Configure scripts to run manually
100% 36MB 11.1MB/s 00:03
530