Services
Location information
Your IX20 device can be configured to use the following location sources:
In conjunction with the with the CM07 CORE modem, the modem's internal Global Navigation
n
Satellite System (GNSS) module that provides information about the current location of the
device.
User-defined static location.
n
Location messages forwarded to the device from other location-enabled devices.
n
By default, the modem's internal GNSS module is enabled.
You can also configure your IX20 device to forward location messages, either from the IX20 device or
from external sources, to a remote host. Additionally, the device can be configured to use a geofence,
to allow you to determine actions that will be taken based on the physical location of the device.
This section contains the following topics:
Configure the location service
Enable or disable modem GNSS support
Configure the device to use a user-defined static location
Configure the device to accept location messages from external sources
Forward location information to a remote host
Configure geofencing
Show location information
IX20 User Guide
Location information
446
448
450
452
456
461
474
445