Table of Contents
Advertisement
Wi-Fi
where value is the type of encryption used by the access point. Allowed values are:
n
n
n
n
n
n
n
n
c. If the type of encryption is set to:
n
n
5. (Optional) Configure background scanning.
Background scanning allows the device to scan for nearby access points and to move between
access points that have the same SSID that is configured for the client connection, based on
the signal strength of the access points.
a. Enable background scanning:
(config network wifi client new_client)> background_scanning enable
true
(config network wifi client new_client)>
b. Set the scan threshold (bgscan_strength), in dB, that is used to determine the scanning
frequency.
(config network wifi client new_client)> bgscan_strength value
(config network wifi client new_client)>
where value is an integer between -113 and 0.
IX20 User Guide
none: no encryption.
owe: WPA3 Enhanced Open, which uses Opportunistic Wireless Encryption (OWE)
technology to provide encryption for Wi-Fi networks that do not use password
protection.
psk: WPA personal encryption.
mixedpsk: Uses both WPA and WPA2 personal encryption.
psk2: WPA2 personal encryption.
psk2sae: Uses WPA2-PSK/WPA3-AES mixed mode.
sae: Uses WPA3 Personal mode.
wpa2: WPA2 enterprise encryption.
psk, mixedpak, psk2, psk2sae, or sae, set the password that the client will use to
connect to the access point:
(config network wifi client new_client)> ssid 0 encryption key_
psk2 password
(config network wifi client new_client)>
wpa2:
i. Set the username that the client will use to connect to the access point:
(config network wifi client new_client)> ssid 0 encryption
id_wpa2 username
(config network wifi client new_client)>
ii. Set the password that the client will use to connect to the access point:
(config network wifi client new_client)> ssid 0 encryption
password_wpa2 pwd
(config network wifi client new_client)>
Configure a Wi-Fi client and add client networks
224
Advertisement
Table of Contents
