Show Script Information - Digi IX20-WAG4 User Manual

Applications
1. Log into the IX20 WebUI as a user with Admin access.
2. At the Status page, click Scripts.
The Scripts page displays:
3. For scripts that are currently running, click Stop Script to stop the script.

Command line
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Determine the name of scripts that are currently running:
> show scripts
Index
-----
0
1
>
Scripts that are currently running have the status of active.
3. Stop the appropriate script:
)> system script stop script1
>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show script information

You can view status and statistics about location information from either the WebUI or the command
line.
IX20 User Guide
Label Enabled
----------- -------
script1 true
script2 true
Status Run time
------ --------
active
idle 01:00
Show script information
535