Create A Virtual Lan (Vlan) Route - Digi IX20-WAG4 User Manual

Interfaces
2. Enter the show dhcp-lease
> show dhcp-lease
IP Address
-------------
192.168.2.194
192.168.2.195
>
3. Additional information can be returned by using the
> show dhcp-lease verbose
IP Address
MAC Address
-------------
-----------------
192.168.2.194
ba:ba:2c:13:8c:71
192.168.2.195
09:eb:10:f0:bc:16
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Create a Virtual LAN (VLAN) route

Virtual LANs (VLANs) allow splitting a single physical LAN into separate Virtual LANs. This is useful for
security reasons, and also helps to reduce broadcast traffic on the LAN.
Required configuration items
Device to be assigned to the VLAN.
n
The VLAN ID. The TCP header uses the VLAN ID to identify the destination VLAN for the packet.
n
To create a VLAN:

WebUI
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX20 User Guide
command at the Admn CLI prompt:
Hostname Expires
--------------- -------
MTK-ENG-USER1
MTK-ENG-USER2
Hostname Expires
-------- ------------------------
MTK-ENG-USER1 May 19 08:25:11 UTC 2021
MTK-ENG-USER2 May 20 11:32:12 UTC 2021
Local Area Networks (LANs)
show dhcp-lease verbose
Type
-------
Dynamic
Dynamic
command:
Active
------
Yes
Yes
156