Table of Contents
Advertisement
Services
3. Click Authentication > Users.
4. Select an existing user or create a new user. See
creating a new user.
5. Click SSH keys.
6. In Add SSH key, enter a name for the SSH key and click .
7. Enter the public SSH key by pasting or typing a public encryption key that this user can use for
passwordless SSH login.
8. Click Apply to save the configuration and apply the change.
Command line
You can add configure passwordless SSH login for an existing user or include the support when
creating a new user. See
instructions assume an existing user named temp_user.
1. Log into the IX20 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Add an SSH key for the user by using the ssh_key command and pasting or typing a public
encryption key:
(config)> add auth user maria ssh_key key_name key
(config)>
where:
key_name is a name for the key.
n
key is a public SSH key, which you can enter by pasting or typing a public encryption
n
key that this user can use for passwordless SSH login
IX20 User Guide
User authentication
for information about creating a new user. These
Use SSH with key authentication
User authentication
for information about
425
Advertisement
Table of Contents
