Digi IX20-WAG4 User Manual page 11

Revision Date
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States
and other countries worldwide. All other trademarks mentioned in this document are the property of
their respective owners.
© 2021 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document "as is," without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
IX20 User Guide
Description
Added support for the configuration of custom scripts
n
that will be run manually, and a new system script
start CLI command to run manual scripts.
New "Find me" feature that flashes cellular-related
n
LEDs to help locate the device onsite and a new system
find-me command.
Added datapoint.upload_multiple function to
n
digidevice python module for uploading multiple
datapoints to DigiRM at once.
Added clear dhcp-lease command to remove all
n
dynamic DHCP leases or certain DHCP leases based on
MAC address or IP address.
Added speedtest command for performing on-demand
n
iPerf or nuttcp speedtests.
Local users are now required to be assigned to an
n
authentication group.
New Network → Advanced → Sequential DHCP address
n
allocation configuration setting for controlling if DHCP
addresses are assigned sequentially or randomly
(disabled by default).
Added ability to control if DHCP addresses are assigned
n
sequentially or randomly (disabled by default).
Added 802.1x port-based network access control,
n
configurable per network interface.
11