Interfaces
(config network interface my_wan)> ipv4 dhcp_hostname true
(config network interface my_wan)>
b. See
Configure SureLink active recovery to detect WAN/WWAN failures
about configuring active recovery.
7. (Optional) Configure IPv6 settings:
a. Enable IPv6 support:
(config network interface my_wan)> ipv6 enable true
(config network interface my_wan)>
b. Set the IPv6 type to DHCP:
(config network interface my_wan)> ipv6 type dhcpv6
(config network interface my_wan)>
c. Generally, the default settings for IPv6 support are sufficient. You can view the default IPv6
settings by using the question mark (?):
(config network interface my_wan)> ipv6 ?
IPv6
Parameters
---------------------------------------------------------------------
----------
dhcp_hostname
enable
metric
mgmt
mtu
type
use_dns
weight
Additional Configuration
---------------------------------------------------------------------
----------
connection_monitor
(config network interface my_wan)>
d. Modify any of the remaining default settings as appropriate. For example, to change the
metric:
IX20 User Guide
See
RFC4702
for further information about DHCP server support for the Client
n
FQDN option.
See
Configure system information
n
device's system name.
for information about setting the IX20
Current Value
false
DHCP Hostname
true
Enable
0
Metric
0
Management priority
1500
MTU
dhcpv6
Type
always
Use DNS
10
Weight
Active recovery
Wide Area Networks (WANs)
for information
113