Table of Contents
Advertisement
Virtual Private Networks (VPN)
8. Click to expand SCEP server.
9. For FQDN, type the fully qualified domain name or IP address of the SCEP server.
10. For Password, type the challenge password as configured on the SCEP server.
11. Click to expand Distinguished Name.
12. Type the value for each appropriate Distinguished Name attribute.
13. Click Apply to save the configuration and apply the change.
Command line
1. Log into the IX20 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Add a new SCEP client:
IX20 User Guide
IPsec
329
Advertisement
Table of Contents
