Table of Contents
Advertisement
Revision
Date
C
September 2020
IX20 User Guide
Description
Release of Digi IX20 firmware version 20.8:
Support for NEMO/DMNR virtual private networks.
n
Support for serial Modbus Gateway.
n
Support for Ethernet network bonding.
n
Support for VRRP+, an extension to the VRRP standard
n
that uses network probing to monitor connections
through VRRP-enabled devices.
Cloud service enhancements:
n
Reduced data usage for reporting health metrics to
l
Digi Remote Manager.
Added Monitoring > Device Health > Only report
changed values to Digi Remote Manager option
to control sending metrics to Digi Remote Manager
on the basis of whether the values have changed
since they were last reported.
Added Monitoring > Device Health > Data point
l
tuning configuration options to fine tune what
datapoints are uploaded as health metrics to Digi
Remote Manager.
Added the ability to select Digi aView as the cloud
l
service.
Added the ability to duplicate firmware to copy the
n
active firmware to the secondary firmware partition.
Moved the update firmware CLI command to system
n
firmware update.
Added new Authoritative option under TACACS+,
n
RADIUS, and LDAP user authentication methods to
prevent falling back to additional authentication
methods.
Cisco Umbrella content filtering.
n
Wi-Fi enhancements:
n
Added new options under Network > Wi-Fi to
l
control Tx Power of the Wi-Fi module.
Added support for multiple RADIUS servers for
l
WPA2 Enterprise.
Added options under System > Log > Server list to
n
allow users to specify the TCP/UDP protocol and port of
the remote syslog server.
Serial port enhancements:
n
Added configuration option under Serial > TCP
l
connection to specify encrypted connection types.
Added configuration option under Serial >
l
3
Advertisement
Table of Contents
