Manually Set The System Date And Time; Network Time Protocol - Digi IX20-WAG4 User Manual

Table of Contents

Advertisement

Services
NTP sync to time.devicecloud.com successful
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Manually set the system date and time

If your network restricts access to NTP servers, use this procedure to set the local date and time.
This procedure is available at the Admin CLI only.
  Command line
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Set the device's local date and time:
> system time set value
>
where value is the The date in year-month-day hour:minute:second format. For example:
> system time set 2021-13-01 12:24:48
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Network Time Protocol

Network Time Protocol (NTP) enables devices connected on local and worldwide networks to
synchronize their internal software and hardware clocks to the same time source. The IX20 device can
be configured as an NTP server, allowing downstream hosts that are attached to the device's Local
Area Networks to synchronize with the device.
When the device is configured as an NTP server, it also functions as an NTP client. The NTP client will
be consistently synchronized with one or more upstream NTP servers, which means that NTP packets
are transferred every few seconds. A minimum of one upstream NTP server is required. Additional NTP
servers can be configured. If multiple servers are configured, a number of time samples are obtained
from each of the servers and a subset of the NTP clock filter and selection algorithms are applied to
select the best of these.
See
Configure the device as an NTP server
server.
IX20 User Guide
for information about configuring your device as an NTP
Network Time Protocol
496

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ix20

Table of Contents